17
DESCRIPTION
1.
Control dial
2.
Thermostat dial
3.
Pilot light
4.
Handle
5.
Air outlet grill
6.
Air intake grill (reverse side)
LOCATION AND CONNECTION
•
Remove allpackagingmaterialand keep out ofreach ofchildren. After
removing packaging, check the appliancefor damage or othersigns
thatcould indicate a fault/defect/malfunction.In caseofdoubt,do not
usetheappliance, butcontactyour vendor forinspectionor replacement.
•
Choosea suitable location for theheaterwhich is atleast one metreawayfrom
anyobstructions,walls or inflammable materials (see also safetyinstructions).
•
Makesure a functioningheater is always placedon a solid, flatand horizontal
surface.
•
Check if thecontroldialis setto 'OFF'(O).
•
Fully extend thepower cord andpluginto a suitable230V socket. To prevent
thecircuit overloading,check thatnoother appliances are connected to the
same group.
SET-UP AND OPERATION
•
Turn the thermostat dialto maximum(clockwise as far as possible).
•
Switch the heater on by turning thecontrol dial to oneof the following three
positions:
Fan
I
Heating at half power (1000W)
1
2
3
5
4
6
6
6
