Termozeta 109002, Инструкция по эксплуатации

Страница: 18 / 22

ENGLISH
18
WARNING!
Before proceeding with the assembly or removal of the
accessories, switch off the appliance and unplug it from the
power outlet.
2.
Insert the plug into the socket.
3.
Press the ignition switch (5) . The indicator light (2) lights up and the
appliance starts to heat up. When the indicator light (2) goes off, about
50 seconds after switching on, the appliance has reached the working
temperature and is ready for use.
During operation, the warning light
(2) comes on and goes off
indicating that the temperature of the heat exchanger is kept under
control.
4.
Press the button (3a) and hold it down to allow steam to be produced.
When the button is released the pump stops working and the steam
stops coming out.
The steam does not come out as soon as you press the steam button,
because the water must pass from the tank to the steam generators.
5.
To emit a continuous and constant jet of steam, press the steam button
(3a) and move the steam lock slider (3b) downwards.
6.
Place the garment on a hanger. Pass the appliance over the garment.
CAUTION!!!
Use the appliance only with vertical movements from the
bottom upwards and vice versa. Do not use the appliance
in position horizontal or upside down, with the nozzles
facing down.
Do not use the appliance on fabrics that are supported or
worn by other people.
7.
During the ironing breaks, you can place the appliance on the base (9) .
Do not rest the appliance on the brush (7) , on the accessory (8) or
lying on its side.
8.
If during use the product stops emitting steam, check the water level in
the tank as it may have run out. In this case, switch off the appliance
and proceed with filling the tank
(4) as indicated in paragraph "2-
WATER TANK REFILL".
9.
At the end of use, turn off the device, disconnect the light from the
power outlet and remove the residual water in the tank.