Articles inside package
Before using the appliance, please confirm whether the articles inside the packing box
are in good conditio. Since when dispatched from the factory some of the elements are
dismantled in package, when taking these special elements out of the packing box, they
are separated. Since the product is mainly made of glass, when taking out of the appliance,
please check carefully whether it is in good condition, for the damage caused in the trans
-
portation proces, please immediately tell the shipper party.
The package should include: a heating panel, drilling template, remote control, manual
with a warranty card, handles with wall plugs.
Installation instruction
If the users have a tool, they can install it according to the operation procedures shown in
the user’s manual, and they can also ask the seler or relevant electric appliance installation
company to install.
Procedure 1:
Before installing the appliance, as shown in the figure below, use the installation positio
-
ning paperboard A1 with holes to make a mark of installation position on the wall (the wall
need to endure the weight of the appliance).When making the mark, horizontal direction
of the paperboard needs to be paralel with the ground. On the position with mark, drill
four holes with bore of 10mm and depth not smaller than 60mm, make sure the hole to
be vertical with the wall.
The distance between the holes should be as below:
