TERK Technologies AM/FM Q Скачать руководство пользователя страница 6

Locating Your AM/FM Q
For Best Results

1.  All antennas are affected by electromagnetic fields.

To maximize performance, position your AM/FM Q
antenna away from direct contact with receivers,
tuners, CD players, TVs and computers. 

Note: Antennas work best when CD players, VCRs and
computers are turned off.

2.  Keep the antenna away from large metal objects.

Placing the AM/FM Q near a window often provides
the best results.

3. On occasions, certain areas in your home may be 

null points or dead spots where no radio signal can
be received. This may also occur in metal-frame
buildings and houses with aluminum siding. In this
case, simply move your antenna, trying different
locations, until the best reception is achieved.

4. In weak signal areas, optimum tuning is achieved

with your receiver’s scan button in the off position.

5.  The Q’s AM loop antenna is the BLACK rippled section

of the antenna. For optimum AM results, position the
”AM Loop“ away from the FM portion of the antenna
so that the AM Loop is at a 90˚ angle from the FM
antenna. The AM portion of the Q is non-amplified.

See Fig. 6.

Q

5

Содержание AM/FM Q









Отзывы: