AM/FM Narrowband Tuning Position:
The Q also provides you with the ability to pick up hard-
to-get radio stations and achieve the best possible signal
with the least amount of noise with Pin-Dot Pre-Tuning.
Pin-Dot Pre-Tuning allows you to manually “fine tune” in
weaker stations.
To set the antenna to Narrowband mode and take
advantage of Pin-Dot Pre-Tuning, adjust the bottom dial
counter-clockwise to the Narrowband position. You are in
Narrowband mode when all LED’s are GREEN except for
one RED LED. You “fine tune” a station by positioning the
single RED LED like a dial on a tuner. The left-most LED
is 88MHz and the LED furthest right represents 108MHz.
Example: If the station you want to fine-tune is 95.5,
then position the red LED between the left and center
green LEDs.
See Figs. 5.
Q
4
88
108
95.5 MHz
Fig. 5
