Terex Z-33, Руководство оператора, Страница: 44 / 58

Operator's Manual First Edition • Second Printing
Operating Instructions
42 Z
®
-33 Part No. 1257143GT
Tilt Sensor Activation Settings
Model Chassis Angle
(side to side)
Chassis Angle
(front to back)
Z
®
-33 4.5° 2.5°
When the Machine On Incline
indicator light is on and the tilt
alarm sounds, the following
functions are affected; drive
functions are disabled.
To restore drive functions, follow
the boom lowering process,
explained in the previous
procedure.
When the machine is stowed, on a
slope, and the tilt alarm sounds,
the following functions are
affected; lift functions are
disabled.
Return the machine to level
ground to restore lift functions.
Drive Enable
Light on indicates that the boom
has moved just past either non-
steer wheel and the drive
function has been interrupted.
To drive, hold the drive enable switch to either side
and slowly move the drive control handle off
center.
Be aware that the machine may move in the
opposite direction that the drive and steer controls
are moved.
Always use the color-coded direction arrows on
the platform controls and the drive chassis to
identify the direction the machine will travel.
Note: The turntable rotation may be disabled in the
stowed configuration due to the automatic control
system. See the message shown in the display.
The primary boom down function may be disabled
when the boom is next to the chassis due to the
automatic control system. See the message
shown in the display.
The primary boom may be lifted when the
secondary boom is lowering due to the automatic
control system. See the message shown in the
display.