Terex Z-33, Руководство оператора, Страница: 28 / 58

Operator's Manual First Edition • Second Printing
Inspections
26 Z
®
-33 Part No. 1257143GT
Pre-operation Inspection

Be sure that the operator’s manual is
complete, legible and in the storage container
located in the platform.

Be sure that all decals are legible and in place.
See Inspections section.

Check for hydraulic oil leaks and proper oil
level. Add oil if needed. See Maintenance
section.

Check for battery fluid leaks and proper fluid
level. Add distilled water if needed. See
Maintenance section.
Check the following components or areas for
damage, improperly installed, or missing parts and
unauthorized modifications:

Electrical components, wiring, and
electrical cables

Hydraulic hoses, fittings, cylinders, and
manifolds

Hydraulic tank

Drive and turntable motors and drive hubs

Wear pads

Tires and wheels

Limit switches and horn

Alarms and beacons (if equipped)

Nuts, bolts and other fasteners

Ground strap

Platform entry mid-rail or gate

Lanyard anchorage points
Check entire machine for:

Cracks in welds or structural components

Dents or damage to machine

Excessive rust, corrosion or oxidation

Be sure that all structural and other critical
components are present and all associated
fasteners and pins are in place and properly
tightened.

Be sure that the battery pack is in place and
properly connected.

After you complete your inspection, be sure
that all compartment covers are in place and
latched.