Terex TL160, Руководство по эксплуатации

Страница: 102 / 114

Care and Maintenance 7
102/112 TL160 Operating Manual 12.9.08 Version 1.0
7.8.18 Cabin ventilation dust filter
The air intake for the heater and fresh air supply of the
cabin features a dust filter, optionally a charcoal/
pollen filter.
7.8.19 Removing the dust filter for cabin
ventilation
• Remove the ventilation louver (80/1).
• Remove the angle bracket (80/2).
• Remove the dust filter (80/3).
• Clean the filter or replace it.
7.8.19.1 Cleaning the dust filter
• Knock the filter with the intake side (side covered
by expanded metal) several times on a flat and
hard surface.
• Using dry compressed air (max. 5 bar), blow
against the direction of flow.
• Check the filter for damage to the paper bellows
and seal.
7.8.19.2 Installation
• Insert new or cleaned dust filter until the stop.
• Re-attach the dust filter with the angle bracket.
• Re-install the ventilation louver.
7.8.20 Windshield washer system
• Top up the windshield washer tanks (81/1) as
required.
• Add antifreeze when temperatures are around or
below freezing.
Fig. 80 Removing the dust filter for cabin ventilation
Attention
Never wash or brush out the filter.
Attention
Never continue to use damaged dust filters!
Fig. 81 Topping up the windshield washer tank
1
Attention
Observe the mounting position of the dust
filter; the air flow arrows must point towards
the cabin.