Terex Robot 15000, Руководство оператора

Страница: 26 / 42

Document 57.0300.0200 - 4
th
Edition 07/2000
- Forlì
Page
22
Robot
INTRODUCTION
This section provides the operator and the ground staff
a practical guide for the gradual learning of the use of
the machine equipped with robot.
Both operator and ground staff shall have the neces-
sary qualities and shall become familiar with both han-
dler and equipment before starting using them.
This familiarisation ensures not only a proper use during
work, but also a prompt and timely intervention of the
ground staff when sudden manoeuvres to protect the
operator on the work platform and the machine integrity
are required.
A
IMPORTANT
For the controls operated from the driving place of
the handler, please refer to the operator’s handbook
of the handler.
C-1 COUPLING THE ROBOT TO THE
HANDLER
To couple the robot to the handler, proceed as follows:
• Release the mounted attachment and store it in a
safe place.
• Approach the quick coupling frame to the robot with
attachment frame rotated forward (fig. C1).
• Couple the upper lock of the platform.
• Retract and lift the robot some centimetres from the
ground. It will center on the attachment frame
automatically.
• Operate the special control lever to lock the robot
definitively (see par. “
Replacing the attachment ”
in the handler operator’s manual).
• Disconnect the attachment locking hoses A (fig. C2)
and connect the robot hoses (fitted with quick
connectors).
SETUP
C
Fig. C1
Fig. C2