Terex R190T-ROW Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 85

background image

7.22 Storage

It may be necessary to store your RT-60/R160T/R190T Compact Track Loader for
an extended period of time.

Perform the following tasks to prepare the machine for storage.

7.22.1 Storage Preparation

• Thoroughly clean the machine (inside and out) including the engine compart-

ment and underbody. Open hood, remove belly pans and pressure wash to
remove all buildup and debris.

• Allow machine to dry thoroughly, then reinstall belly pans, close hood. Touch up

any paint blemishes to prevent rust.

• Lubricate all chassis, loader and undercarriage points as indicated on the chart

in this chapter. Wipe away any excess grease.

• Replace any worn or damaged components.
• Add fuel stabilizer to near empty fuel tank, then fill to evenly distribute stabilizer

throughout fuel.

Note:

Run the engine for 5 minutes to circulate stabilized fuel throughout fuel

system.

• Park the machine in a dry place that provides protection from the elements.
• Drain and refill the cooling system with 50/50 pre-mixed antifreeze/water.
• Replace engine oil and filter. (ch. 7)
• Replace hydraulic oil and filters (ch. 7)
• Jack the machine and rest the chassis on suitable mechanical supports to

remove weight from the torsion axles and suspend the tracks off of the ground.

• Apply protective lubricant (grease) to all exposed cylinder rods.
• Replace air cleaner elements and a/c filter element (if equipped).
• Return all controls to neutral position.
• Cover the exhaust outlet to shield it from the elements and foreign objects.
• Disconnect and remove the battery from the machine. Adjust the electrolyte

level if needed and charge before storing. Store in a warm dry place.

Do not

allow battery to freeze.

Charge periodically during storage as necessary.

• Label or tag the machine to indicate storage condition.

7 MAINTENANCE

79

Battery contents are flammable and corrosive. Contact with skin can
cause burns! Do not smoke or allow open flame near the battery to avoid

explosion! Wear appropriate PPE.

RT-60/R160T/R190T ROW O&M

0404-659 2016-05

«
...
78
79
80
81
82
...
»

Содержание R190T-ROW






















































































Отзывы:

Нет отзывов

Похожие инструкции для R190T-ROW

Бренд: Case Страницы: 21

Бренд: Takeuchi Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды