Terex Genie Z-60/37DC, Руководство оператора

Страница: 52 / 67

Operator's Manual First Edition • Second Printing
Operating Instructions
50 Z-60/37DC • Z-60/37FE Part No. 1270491
Machine Not Level Indicator Light
If the tilt alarm sounds when the
platform is raised, the Machine Not
Level indicator light will come on
and the drive function in one or
both directions will not operate.
Identify the condition of the boom
on the slope as shown below.
Follow the steps to lower the boom
before moving to a firm, level
surface. Do not rotate the boom
while lowering.
If the tilt alarm sounds
with the platform uphill:
1 Lower the primary
boom.
2 Lower the secondary
boom.
3 Retract the primary
boom.
If the tilt alarm sounds
with the platform
downhill:
1 Retract the primary
boom.
2 Lower the secondary
boom.
3 Lower the primary
boom.
Platform Overload Indicator Light
Light flashing indicates the
platform is overloaded and no
functions will operate. The
platform control LCD screen will
also display the following
message, PLATFORM IS
OVERLOADED.
Remove weight from the platform
until the light goes off and the
message in no longer displayed.
Overload Recovery
If the ground controls LCD screen displays
OVERLOAD RECOVERY, the emergency
lowering system has been used while the platform
was overloaded. For information on how to reset
this message, please consult the appropriate
Genie Service Manual.
Aircraft Protection Package (if equipped)
If the platform bumper comes
into contact with an object, the
machine will shut down and no
functions will operate.
1 Start the engine.
2 Press down the foot switch.
3 Move and hold the aircraft
protection override switch.
4 Move the appropriate
function control handle or
toggle switch to move the
machine away from aircraft
components.