Terex Genie S-45 Trax, Дополнение к руководству оператора

Страница: 5 / 17

Second Edition • First Printing Operator's Manual Supplement
Safety Rules
Part No. 1314078GT Lighting Technicians and Studio Grips Supplement 5
Safety Rules
Danger
Failure to comply with the following
requirements will result in death or
serious injury.
Modification of the Approved Models for use
by attachment of lights, light mounting
hardware, camera mounting hardware and light
diffusion frames (LDFs) to the platform guard
rail is authorized by Genie only if the following
rules and requirements are strictly followed:
•
Operators must have completed training for the
attachment of lighting or camera equipment
and LDFs to the platform guard rail. Training
must include, but not be limited to, information
regarding the effect on platform capacity and
stability resulting from the attachment of
equipment to the platform guard rail or to the
boom of the aerial lift, and hazards associated
with this application.
•
All operating instructions and warnings
contained in the Operator’s Manual, Sa fety
Manual (ANSI markets) and Manual of
Responsibilities (ANSI markets), and on decals
found on the particular Genie aerial lift, must be
followed.
•
The aerial lift must be operated only on a firm,
level surface.
•
Operators must be trained and be able to
demonstrate proficiency in the operation of the
specific model of Genie aerial lift being
operated.
•
Genie booms are not insulated. Precautions
shall be taken to protect the operator and
people on the ground from electrocution
hazards. The attachment of power supply
cables to the boom shall not restrict the
movement of the aerial lift or endanger the
operator or people on the ground.
•
Attachment of power supply cables to the boom
shall be accomplished in a manner that does
not cause a tip-over hazard due to a side or
vertical force that could result in the machine
becoming unstable.
•
Power supply cables must be attached to the
end of each boom section in a manner that
ensures the cable cannot be damaged from
tensioning, pinching or crushing when the
boom is operated.