Terex Genie Lift Guard GS-4047, Дополнение к руководству оператора

Страница: 17 / 20

First Edition • Second Printing Operator's Manual Supplement
Software Update
Part No. 1288739GT Lift Guard
™
Contact Alarm 17
Software Update
Machines with a control system software revision
of "P" or higher do not require a software upgrade.
Machines with revision of "N" or lower, and is
equipped with proportional lift control, will require a
software upgrade.
Software Version
Note: Before proceeding verify the version of
software installed on your machine. The
software revision is displayed at the GCON
LCD.
1 Turn the key switch to ground controls or
platform controls and pull out the red
Emergency Stop button to the on position at
both ground and platform controls.
Result: The PCON LCD will show "CH".
Result: The GCON LCD will show the machine
model and hour meter information. After 3
seconds, the machine model will not show on
the display.
2 Press the ground control scroll down button.
Result: The GCON LCD will show the software
revision and hour meter information. After 5
seconds, the ground controls LCD will return to
machine model and hour meter information.
1
GCON LCD
2 scroll down button
3 Push in the red Emergency Stop button to the
off position at both the ground and platform
controls and turn the key switch to the off
position.
Result: Revision "P" or higher, test the contact
alarm. Refer to Function Test.
Result: Revision "N" or lower, update the
machine software. Refer to Firmware Site
Download.
= =
+ - + -
READY . GS3369
00000.0 Hours
SOFTWARE REV
00000.0 Hours
137562
4 3 2 1
2
1