Terex Genie GTH4016 SR, Руководство оператора

Страница: 43 / 152

May 2015 Second Edition - First Printing
Part No. 57.0009.0607 GTH 4016 R - GTH 4018 R - GTH-5021 R 41
Test the Parking Brake
30 Push the bottom of the rocker switch to turn the
parking brake on: the parking brake warning light
should come on.
31 Push down lightly on the accelerator pedal.
¤
Result: The machine should not move .
Test the Rear Axle Lock
32 Raise the boom above 50°.
33 Rotate the slewing upper structure more than
10° (the Load Limiting display shows “TURRET
NOT ALIGNED”).
34 Place transmission into gear
¤
Result: The machine should not move
35 Operate the frame levelling function in both
directions.
¤
Result: The frame levelling function should not
operate.
Test the Outriggers
36 Push the top of each outriggers switch and fully
extend and lower the outriggers. Push the bottom
of each outrigger switch to fully raise and retract
the outriggers.
¤
Result: The outriggers should operate smoothly
and in the expected direction.
Test the Outriggers Cutout
37 Raise the boom over 2 meters . Attempt to deploy
or retract outriggers
¤ Result: The outriggers should not work.
Inspections
Test the Road Transfer Mode
38 Set the steering mode selector to road transfer
mode.
39 Attempt to: operate the boom, rotate the slewing
upper structure and extend/lower the outriggers
functions.
¤
Result: None of these functions should operate.
Test the Levelling Cutout (if equipped)
40 Raise the boom over 2 meters.
41 Put the transmission control lever in neutral.
42 Set parking brake.
Slowly level the machine to the left and to the right.
¤
Result: The levelling function should not operate.
Test the Lights
43 Verify that all equipped working and road lights
are functional.
Test the Load Limiting System
44 Load a known weight of approximately 1000 kg.
45 Raise the boom about 30 cm above the ground.
46 Extend the boom and check if the system enters
the alarm mode once it has reached the distance
as indicated in the load charts for the attachment
fitted to the machine.
¤
Result: the system alarm mode should sound.