Terex Genie GTH4016 SR, Руководство оператора

Страница: 22 / 152

May 2015
20 GTH-4016 R - 4018 R - 5021 R Part No. 57.0009.0607
Second Edition - First Printing
Work Area Safety
Component Damage Hazards
Do not use any battery or charger greater than 12V
to jump-start the engine.
Do not use the machine as a ground for welding.
Do not steer the front tires on dry pavement when
the axle differential lock is activated.
Do not lock the axle differential when the machine
is moving.
Crush Hazards
Do not operate the outriggers while people are in the
path of movement.
Keep clear of moving parts during machine operation.
Set the parking brake, put the transmission in neutral
and lower the carriage or the attachment to the ground
before leaving the machine.
Keep clear of elevated components.
Support components before performing service. Keep
clear of moving parts during machine operation.
Do not operate the slewing function while people are
in the path of movement.
Do not operate the outrigger, transmission, chassis
levelling or steering controls when the slewing upper
structure is rotated over 90° from center, without first
verifying the direction of movement according to the
operating instructions. All movements are reversed
when the slewing upper structure is rotated beyond
90° from center.
Burn Hazards
Allow hot surfaces to cool before
touching or servicing.
Explosion and Fire Hazards
Do not start the engine if you smell or detect liquid
petroleum gas (LPG), gasoline, diesel fuel or other
explosive substances.
Do not refuel the machine with the engine running.
Refuel the machine and charge
the battery only in an open,
well-ventilated area away from
sparks, flames and lighted
tobacco.
Do not operate the machine in hazardous locations
or locations where potentially flammable or explosive
gases or particles may be present.
Do not spray ether into engines equipped with glow
plugs or air intake grid heaters.
Do not use air or oxygen for charging the accumulators.