Third Edition • Sixth Printing
Operator's Manual
Attachments
Part No. 237108
GTH-844 55
Installing and securing the
platform
Center the platform on the telehandler.
Properly secure the platform to the telehandler
according to the manufacturer’s instructions.
Be sure that the forks supporting the platform are
secured to prevent them from pivoting forward.
If mounted to a rotating attachment, center the
rotation of the attachment and then deactivate its
rotation capability.
Level the platform, both side to side (frame sway
function) and front to rear (attachment tilt function).
Entering, occupying and exiting
the platform
Use three-point contact when entering or exiting a
work platform.
Only enter and exit the platform when it is at
ground level.
Only enter and exit the platform at the designated
entry and exit locations.
Close and secure the entry point gate or railing
before signaling to be lifted.
Attach PFPE to the designated lanyard anchor.
Occupants should use the guardrail to help
stabilize themselves during movement. Be aware
of crushing hazards when grasping the platform
guardrail.
Lifting and lowering the platform
Set the parking brake and place the transmission
into neutral.
If equipped with stabilizers: Lower the stabilizers.
Only allow personnel to enter and exit the platform
when it is at ground level.
Establish and maintain a means of communication
with the occupants.
Only move the platform at the request of a single
designated occupant. Never tilt the platform
forward or backward, or attempt to level the
machine when the platform is occupied.
Sound the horn to alert occupants prior to lifting or
lowering the platform.
Move the platform slowly, smoothly and with
caution.
Keep hands and feet clear of all controls other than
those in use.
When the platform is occupied, the telehandler
operator must remain seated in the cab with the
occupants in direct line of sight.
