Third Edition • Sixth Printing
Operator's Manual
Inspections
Part No. 237108
GTH-844 23
Pre-operation Inspection
Be sure that the operator’s and safety manuals
are complete, legible and in the storage
container located in the cab.
Be sure that all decals are legible and in place.
See Inspections section.
Check for hydraulic oil leaks and proper oil
level. Add oil if needed. See Maintenance
section.
Check for battery fluid leaks and proper fluid
level. Add distilled water if needed. See
Maintenance section.
Check the transmission oil level. Add oil if
needed. See Maintenance section.
Check for engine oil leaks and proper oil level.
Add oil if needed. See Maintenance section.
Air-filled tires models: Check for proper tire
pressure. Add air if needed. See Maintenance
section.
Check the following components or areas for
damage, improperly installed or missing parts and
unauthorized modifications:
Electrical components, wiring and
electrical cables
Hydraulic hoses, fittings, cylinders and
manifolds
Fuel and hydraulic tanks
Drive motors and drive hubs
Boom wear pads
Tires and wheels
Engine and related components
Limit switches
Steer and axle sensors
Lights, alarms and beacons (if equipped)
Pins, nuts, bolts and other fasteners
Check entire machine for:
Cracks in welds or structural components
Dents or damage to machine
Excessive rust, corrosion or oxidation
Be sure that all structural and other critical
components are present and all associated
fasteners and pins are in place and properly
tightened.
Be sure the windshield and windows (if
equipped) are clean and free of obstructions
that might limit visibility.
After you complete your inspection, be sure
that all guards, screens and compartment
covers are in place and secured.
