Terex Genie GS30MD-101, Руководство оператора

Страница: 42 / 53

Operator's Manual First Edition • Third Printing
Operating Instructions
40 GS
™
-1330m Part No. 1290847GT
How to Fold Down the Guardrails
The platform railing system consists of one fold
down rail section for the extension deck and one
section for the main deck. All sections are held in
place by four wire lock pins.
1 Fully lower the platform and retract the
platform extension.
2 Remove the platform controls.
Fall hazard. Use caution and maintain a firm
footing on the platform floor at all times while
folding the guard rails.
3 From inside the platform, remove the two
extension deck lock pins.
Keep hands free of pinch points.
4 From the middle of the extension deck railing,
fold down the extension deck rail assembly
toward the rear of the unit.
5 At the rear of the main deck, remove the two
main deck lock pins.
Keep hands free of pinch points.
6 From the middle of the unit, fold down the main
deck railing assembly toward the front of the
unit.
7 Connect entry swing frame with left main rail
by the pin.
Keep hands free of pinch points.
8 Carefully open the gate and exit the platform.
9 Remove the two pins from one side of the
main rails.
Keep hands free of pinch points.
10 Fold the side main rail towards the inside of
the unit.
11 Remove the other two pins from the other side
of the main rails.
Keep hands free of pinch points.
12 Fold the other side main rail towards the inside
of the unit.
Note: To assist in the removal and replacement of
the wire lock pins, pull or push back on the railing
to compress the rubber bumpers.
How to Raise the Guardrails
Follow the fold down instructions but in reverse
order, ensuring all lock pins are in place and
installed properly.