Operator's Manual
Third Edition • First Printing
Inspections
32
GS
™
-
2669RT • GS
™
-
3369RT • GS
™
-4069RT
Part No. 1305657GT
Test Auxiliary Lowering
36
Push and hold the lift function enable button
and raise the platform approximately 2 ft /
60 cm.
37
Push in the red Emergency Stop button to shut
off the engine.
38
Pull out the red Emergency Stop button to the
on position.
39
Press and hold the lift function enable button.
Activate the up/down rocker switch in the
direction indicated by the yellow arrow.
Result: The platform should lower.
Note: The Emergency Stop button can be pushed
when the test is performed.
Test the Outrigger System (if equipped)
40
Push and hold the auto level button.
41
Activate the up/down rocker switch in the down
direction.
Result: The outriggers should extend and level
the machine. A beep will sound when the
machine is level. The indicator lights on the
outrigger LED will be green.
42
Push and hold the auto level button.
43
Activate the up/down rocker switch in the up
direction.
Result: The outriggers should retract and return
to the stowed position. The indicator lights on
the outrigger LED will be red.
