Third Edition • First Printing
Operator's Manual
Controls
Part No. 1305657GT
GS
™
-
2669RT • GS
™
-
3369RT • GS
™
-4069RT
23
Platform Control Panel
1
Outrigger auto level button
Press this button to activate the auto level
function.
2
Engine start button
Press this button to start the engine.
3
Engine idle select button with indicator light
Press this button to select the engine idle
setting. Light on indicates high idle is selected.
Light off indicates low idle is selected.
4
Gasoline/LPG models: Choke button
Press this button to aid in starting the engine in
cold conditions.
Diesel models: Glow plug button
Press this button to aid in starting the engine in
cold conditions.
5
Gasoline/LPG models: LPG select button with
indicator light
Press this button to select LPG.
6
Horn button
Press this button and the horn will sound.
Release the button and the horn will stop.
7
Generator select button with indicator light
Press this button to turn the generator on.
Indicator light will be on. Press the button again
to turn the generator off.
8
Machine on incline button with indicator light:
Low speed operation for inclines
Press this button to select low speed operation
for inclines.
9
Green power light/Red error indicator light
Green power light is on when Red Emergency
Stop button is pulled out to the on position.
If red error indicator light is on, push in and pull
out the Red Emergency Stop button to set the
system. If the light stays red, tag and remove
the machine from service.
10
Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions and turn the
engine off. Pull out the red Emergency Stop
button to the on position to operate the
machine.
11
Function enable switch
Press and hold the function enable switch to
enable the drive function.
12
Proportional control handle for drive function
Move the control handle in the direction
indicated by the blue arrow on the control panel
and the machine will move in the direction that
the blue arrow points. Move the control handle
in the direction indicated by the yellow arrow on
the control panel and the machine will move in
the direction that the yellow arrow points.
