Terex Genie BBSKETDL15B-1001, Руководство оператора

Страница: 15 / 69

First Edition - Second Printing December 2015
Part No. 57.0303.5251 SHOVEL - BUCKET - BASKET 15
Attachment Description
Mixing Bucket
This bucket is designed to produce limited volumes
of concrete by mixing its main components (cement,
aggregates, sand and water) and to discharge such
volumes (when the concrete is ready). It mainly
consists of a welded concave shaped steel structure
designed to gather from ground aggregates, cement
and sand, before the concrete mixing phase is
started, and then to mix these components with water
in order to produce concrete. The main components
of this welded structure are the front blade, which
works as the leading edge of the bucket “cutting”
the material volume and separating the part which
is gathered by the bucket itself, the central concave
shell, which provides the volume for the material to
be gathered and mixed, and the side walls, which
laterally close the useful volume of the bucket. To
mix the concrete components, a mixing blade made
by welded and shaped plates, is provided and
installed longitudinally to the main axis of the bucket.
This blade rotates on bearings installed on the side
walls of the bucket and is powered by a hydraulic
motor and a gear box which are located externally
of the right side wall of the bucket.
The concrete, after the mixing phase, can be
discharged through a dedicated door located on
the bottom of the bucket and activated through
a mechanism and a hydraulic cylinder. The
mixing blade and the concrete discharge door
are hydraulically powered through the hydraulic
auxiliary line available on the top of the boom. These
two functions are controlled by a dedicated radio
remote control device which can be operated also
by operators working outside of the machine cabin.
Before the concrete mixing phase is started, the top
of the bucket must be closed by a dedicated door,
made by a steel grid and hinged on the top of the
rear wall of the bucket, with the aim of protection
against moving parts. The steel grid allows the
operator to check when the concrete is ready for
discharge. On the rear area of the bucket, there are
two shaped plates welded to its main structure and
designed to be coupled with the GTH telehandlers
standard attachments interface.
This equipment is coupled to the telehandler
through the coupling frame
B
