Escaping fluid under pressure can penetrate skin causing serious injury.
Relieve pressure before disconnecting hydraulic lines. Keep away from
leaks and pin holes. Use a piece of cardboard or paper to search for leaks.
DO NOT use your hand.
TECH TIP 02 | RELEASED 02.07.2022 | VERSION 1.0
STEP 2
Install the gauge in the location indicated in
step one. The boom must be supported by the
boom rest or the lift cylinders must be retracted
fully before attempting to install the gauge.
FIGURE 2 - Test Port
FIGURE 3 - Test Port
485770 HOP Manifold Shown for G1 Location
Individual sensing valve may also be located
under the rider seat on the command post
STEP 3
Operate unit to bring hydraulic fluid to normal
operating temperature.
PAGE 5 OF 7
