The Minute display of the Alarm time starts to flash. Use the “
▲
” and “
▼
“buttons to set the required
minute. Press
ALARM
button to confirm your setting and to end the setting procedure.
To activate or deactivate the daily alarms, briefly press
the “
ALARM
” button once.
F.Y.I.
After 7 seconds without pressing any button the clock switches automatically from setting mode to
Normal clock mode.
The alarm will sound for 1 minutes if you do not deactivate it by pressing any button. In this case
the alarm will be repeated automatically after 24 hours.
Rising alarm sound (crescendo, duration: 1 minutes) changes the volume 4 times whilst the alarm
signal is heard.
Automatic SNOOZE function
To activate the automatic snooze function: While the alarm is sounding, press the
“
SNOOZE/LIGHT
” button to activate the snooze function. When the snooze function is activated,
the “
Zz
” symbol appears in the display.
This operation moves the alarm back by 5 minutes and the alarm will restart at this time.
°C/°F temperature display:
The temperature is displayed either in
°C or °F. Briefly pressing the“
▼
“button allows you to switch
between the individual models.
Radio connection to outdoor sensor
Iinsert the 2 batteries in to the transmitter, Pay attention to observe the correct polarity. One sensor
is suplied with your receiver
Press and hold down the
“
▼
“ button for 2 seconds to search for outdoor sensors (to erase the
current data inside the RC clock).
Receiving of the RCC signal
After power on, the unit will automatically receive RCC signal for Max. 7 minutes, and the RCC icon
flash at 1Hz.
At 1:00 /2:00 / 3:00 am, RCC receiving will be turned on automatically, and the clock will be
synchronized if receive successfully. If this receiving fail (the radio mast icon disappears from the
display), the system will automatically attempt another synchronization at the next full one hour.
This procedure is repeated automatically up to total 5 times per day.
Press and hold
the “
WAVE
“ key also can enable or disable the RCC receiving. If no signals
received within 7 minutes, then the
DCF
signal search stops (the radio mast icon disappears) and
start again at the next full one hour.
F.Y.I.
A flashing radio mast icon indicates that the unit is receiving RCC signal.
A continuously displayed radio mast icon indicates that the
DCF
signal was received successfully,
the radio mast icon will disappear if receiving fail.
We recommend a minimum distance of 2.5 meters to all sources of interference, such as
televisions or computer monitors
Radio receiving is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such
extreme circumstances, place the unit close to the window.
Backlight
Briefly press the
SNOOZE/LIGHT
button to activate the display lighting for 5 seconds.
Weather forecast
The weather station uses the air pressure data for weather forecast. When forecasting the weather,
the station has 4 icons: sunny, light cloudy, cloudy and rainy
