XM762-V1.0-NR
27
•
Turn the encoder to select “Auto Pro Part 1”, “Auto Pro Part 2” or “Auto Pro Part 3”, and thus
select which Slave program is to be sent. Selection “Part 1” means, that the Slave unit runs the
same program as the master units.
•
Press the Enter button to confirm.
•
Press the MODE/ESC button in order to return to the main menu.
4. Program selection for Edit Program
•
Select “Edit program” by turning the encoder.
•
Press the Enter button to confirm.
•
Select “Edit program” by turning the encoder.
•
Press the Enter button to confirm.
•
Turn the encoder to select the desired program. With this function you can edit specific scenes
into a specific program.
•
Press the Enter button to confirm.
•
Press the MODE/ESC button in order to return to the main menu.
5. Automatic Scene Recording
•
Select “Edit program” by turning the encoder.
•
Press the Enter button to confirm.
•
Select “Edit scenes” by turning the encoder.
•
Turn the encoder to select the desired scene numbers. You can program a maximum number of
250
•
Turn the encoder to select the desired scene numbers. You can program a maximum
number of 250 scenes.
•
Press the Enter button to confirm.
•
Press the MODE/ESC button in order to return to the main menu.
Example:
Program 2 includes scenes: 10, 11, 12, 13
Program 4 includes scenes: 8, 9, 10
Program 6 includes scenes: 12, 13, 14, 15
Auto Pro Part 1 is Program 2;
Auto Pro Part 2 is Program 3;
Auto Pro Part 3 is Program 6
The 3 Slave groups run the Auto Program in certain time segments, as shown in the following
picture:
