XM762-V1.0-NR
24
9.4.6 Initial Status
With this function, Display initial effect position.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Personality
”
is displayed. Press ENTER, the display will show
“
Personality
”
.
2
．
Press <Up/Down>, the display will show
“
Initial status
”
.
3
．
Press< ENTER>, the display will show
“
Initial status
”
.
4
．
The display show
“
XXX
”
.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.4.7 Wireless DMX
From factory, this projector is prepared for wireless data transmission (W-DMX). If you wish to
de-activate W-DMX control, you can select the function “De-activate WDMX” by turning the
encoder. With the function “rest”, you can log out the projector from the wireless sender.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Personality
”
is displayed. Press ENTER, the display will show
“
Personality
”
.
2
．
Press <Up/Down>, the display will show
“
Wireless DMX
”
.
3
．
Press< ENTER>, the display will show
“
Wireless DMX
”
.
4
．
The display show
“
Activate WDMX
”
, Press <Up/Down>, the display will show
“WDMX Off”, “Act & Data Out” or “Clean WDMX Memo”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.4.8 Reset Default
With this function, you can select restore factory set for ON or OFF, the default is OFF.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Personality
”
is displayed. Press ENTER, the display will show
“
Personality
”
.
2
．
Press <Up/Down>, the display will show
“
Reset Default
”
.
3
．
Press< ENTER>, the display will show
“
Reset Default
”
.
4
．
The display show
“
OFF
”
,Press <Up/Down>, the display will show “ON”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.5 Reset Function
With this function you can reset the device via the Control Board. You can select the different
reset functions by turning the encoder.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Reset
Function
”
is displayed. Press ENTER, the display will show
“
Reset Function
”
.
2
．
The display show
“
Reset All
”
, Press <Up/Down>, the display will show
“
Reset
Pan&Tilt
”
，
“
Reset Colors”, “Reset Gobos”, “Reset Shutter”, “Reset Others ”.
3
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.6 Effect Adjust
9.6.1 Test Channel
With this function you can test each channel on its (correct) function.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Effect Adjust
”
is displayed. Press ENTER, the display will show
“
Effect Adjust
”
.
2
．
Press <Up/Down>, the display will show
“
Test Channel
”
.
3
．
Press< ENTER>, the display will show
“
Test Channel
”
.
