- - XM767-V1.2-NR
２２
10. ERROR MESSAGE
When you turn on the fixture, it will make a reset at first. The display may show“Err channel is
XX” while there are problems with one or more channels. “XX” stands for channel 1, 2, 3, 5, 6
who has the testing sensor for positioning. For example, when the display shows “02 Er”, it
means there is some error in channel 2. If there are some errors on channel 1, channel 5, channel
6 at the same time, you may see the error message “01 Er”, “05 Er”, “06 Er” flash repeated for 2
times, and then the fixture will generate a second reset. If the fixture remain error message after
performing reset more than 2 times, only the channels which have errors can not work properly,
others can work as usual. Please contact with dealer or manufacturer for service, self repair is not
allowed.
01Er:
(Color Wheel error) This message will appear after the reset of the fixture if the head’s magnetic-indexing
circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on
the main PCB). The head is not located in the default position after the reset.
02Er:
(Rotating gobos error) This message will appear after the reset of the fixture and if the magnetic-indexing
circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its driver circuit on
the main PCB). The rotating gobo is not located in the default position after the reset.
03Er:
(Gobo rotating error) This message will appear after the reset of the fixture and if the magnetic-indexing circuit
malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its driver circuit on the
main PCB). The zoom is not located in the default position after the reset.
05Er:
(PAN Movement error) This message will appear after the reset of the fixture if the magnetic-indexing circuit
malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its drive circuit on the
main PCB). The color wheel is not located in the default position after the reset.
06Er:
(TILT Movement error) This message will appear after the reset of the fixture if the yoke’s magnetic-indexing circuit malfunction
(sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on the main PCB). The yoke is not located
in the default position after the reset.
07Er:
(Prism error) This message will appear after the reset of the fixture if the yoke’s magnetic-indexing circuit
malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on the main
PCB). The yoke is not located in the default position after the reset.
09Er:
(Focus error) This message will appear after the reset of the fixture if the yoke’s magnetic-indexing circuit
malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on the main
PCB). The yoke is not located in the default position after the reset.
