GLW760 IP User Manual XM1586-V1.1-NR
28
DMX modes which can be set according to user's needs
.
To set one of these user modes see
below
：
1
．
Tap <MODE/ESC> button
，
access the main menu
，
Tap the <Up/Down> button until
“
Users mode set
”
is displayed
.
Press <ENTER>
，
the display will show
“
Users mode
set
”.
2
．
Choose
“
Edit User Mode A
”
，
press
“
ENTER
”.
3
．
Set
“
Max Channel=xxx
”
the max channel
.
4
．
Set
“
Edit User Mode B
”
and
“
Edit User Mode C
”
as above
.
9.6.1.
User Mode
With this function
，
you can create user defined channel orders
.
9.6.2.
Edit User Mode A/B/C
With this function
，
you can adjust the rest user defined channel order
.
1
．
Tap <MODE/ESC> button
，
access the main menu
.
2
．
Tap the <Up/Down> button until
“
Users mode set
”
is displayed
.
3
．
Press <ENTER>
，
the display will show
“
Users mode set
”.
4
．
The display show
“
Edit User Mode A
”
first channel
，
Press <Up/Down> the display will
show
“
Edit User Mode B
”
，
“
Edit User Mode C
”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu
.
9.7.
EDIT PROGRAM
1
．
Tap <MODE/ESC> button
，
access the main menu
.
2
．
Tap the <Up/Down> button until
“
Edit grogram
”
is displayed
.
3
．
Press <ENTER>
，
the display will show
“
Edit grogram
”.
4
．
The display show
“
Select programs
”
，
Press <Up/Down>
，
the display will show
“
Edit
Program
”
，
“
Edit Scenes
”
，
“
Rec. Controller
”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu
.
Run the auto program
：
A master fixture can output to three different program signals to
the slave fixture to operate. It means the host will send cyclically in the following orders
(The host will keep operating the program of Part 1) Then the slave fixture will make
the selectively receiving according to its own set
.
1
．
If the slave fixture chooses Run For Slave 1 from the menu of 1-3,then it will receive
the part 1’s automatic program from link, in the same way
，
when the slave fixture
chooses Run For Slave 2,then it will receive the part 2’s automatic program from link
.
2
．
Enter the menu of 1-3 Function Mode---Set To Slave
，
Here to set machine operate
which part of the program during the host-slave connection
.
3
．
Enter the menu of 1-4
，
1-5 Function Mode---Set To Master
.
4
．
Enter the menu of 8-1 Edit Program---Auto Program Part1.The host outputs three
groups driven program---Part1
，
Part2
，
Part3(Part1 program runs the same effect as the
host)
