Terberg YT182, Руководство по эксплуатации

Страница: 61 / 71

TD2303-08EN YTxx2 60
7.4.2 Emergency stop (optional)
An emergency stop switch can be mounted on the vehicle to stop the engine
and to disconnect all electronics at once. This red switch can be installed on
different positions (for instance inside the cab and/or under the step on either
side of the vehicle).
The switch has a spring-loaded cover and is locked in the ON position. As soon
as the cover is opened the switch can be set to the OFF position manually.
If one of the switches is set to the OFF position the engine is stopped and all
the electronics are disconnected at once.
When there is an emergency and it is important to disconnect all the
electronics, do the procedure as follows:
1. Open the cover of one of the emergency switches manually.
2. Set the switch to the OFF position manually (anti-clockwise rotation).
3. The engine will stop and all the electronics will be disconnected.
Make sure that the situation is safe before you set the switch to the ON position again.
Do close the cover manually.
WARNING
Do open the cover in case of an emergency only! As soon as the switch is set to the OFF
position all the electronics are disconnected and the engine is stopped.
When any of the switches is activated all fault codes that are stored, will be erased.
Any ongoing cleaning processes of the exhaust system will be stopped. This can cause future
service issues.
Make sure that the situation is safe before you set the switch to the ON position again.