14
EN
E
N
3
.
B
in
l
if
t
o
p
e
ra
ti
o
n
37751
12-2014
3.5
Loading with the pick-up comb
ã
Terberg Machines B.V., IJsselstein, The Netherlands
All rights reserved. No part of this book may be reproduced, stored in database or retrieval system, or published, in any form or in any
way, electronically, mechanically, by print, photoprint, microfilm or any other means without prior written permission from the publisher.
4-wheel containers
with a ROLL top;
contents 770-1100 litres
with a FLAT lid;
contents 500 to 1280 litres
The bin lift is equipped with automatic 4-wheel con-
tainer recognition. When a 4-wheel container is rol-
led against the pick-up comb, the catcherbar goes
automatically to Position B (folded-away position).
1) Check that the hopper plate (06) is closed.
2) Switch on the refuse collection vehicle compac-
tor system.
3) If there are footboards, fold both of them
down.
4) Catcherbar (07):
•
For containers with a flat lid of
500 to 770 lit-
res
, the catcherbar should be in
Position A
(this
is the working position). The yellow indicator
LED, left, should be on.
•
For flat-lid containers with a capacity of
1000 to
1280 litres
and for
roll-top
containers, the
catcherbar should be in
Position B
(folded-
away position). The yellow indicator LED, right,
should be on.
Put the catcherbar in the correct position using
the black button (
C
).
5) Roll the container against / above pick-up comb (05).
6) Container emptying:
Press the light blue UP
button (
A
), on either
side of the bin lift. The
container is then raised
to the tilting position and
emptied.
A
B
A
B
7) Container removal:
Press the dark blue
DOWN button (
B
). The
container then lowers
back to the ground.
Remove the container
from the bin lift as soon
as the wheels touch the
ground.
Shake function (compostable waste)
If refuse gets stick in the container, you can use the
shake function.
See 2-wheel bins, Page 13.
Button control station for container take-up (03)
On the L/H tilt arm there is a button control station
for limited raising and lowering of the pick-up comb.
• Roll the container against / above pick-up comb (05).
• Container take-up:
Press the UP button (
G
)
of the container take-up
control station (03).
The container is picked
up from the ground with
the wheels.
Then go to the button control station (01/02) on
the L/H or R/H side.
• Then proceed as described in points 6 and 7.
A
B
A
B
S
T
O
P
S
T
O
P
Make sure that the container is located cor-
rectly on the pick-up comb.
Make sure that the container is located cor-
rectly on the pick-up comb.
