Digital Panel Design Demonstration
8
3-2
Configuring the TV Player (DE2 User Only)
Locate the project directory from the CD-ROM included and follow the steps
below:
For DE2 boards with Serial Number (S/N) starting with Digit 0
Quartus II Project Directory: DE2_LCM_TV/For_DE2_SN_0X
For DE2 boards with Serial Number (S/N) starting with Digit 1
Quartus II Project Directory: DE2_LCM_TV/For_DE2_SN_1X
FPGA Bitstream Used:
DE2_LCM_TV.sof
or
DE2_LCM_TV.pof
1.
Ensure the connection is made correctly as shown in Figure 3.2. Make sure
the IDE cable is connected to JP1 of the DE2 board.
2.
Download the bitstream (DE2_LCM_TV.sof/pof) to the DE2 board.
3.
Connect a DVD player’s composite video output (yellow plug) to the Video-in
RCA jack of the DE2 board.
4.
Press KEY0 on the DE2 board to reset the circuit.
Figure 3.2. The connection setup for the TV player demo
