Terasic Stratix 10 DE10-Pro SX Скачать руководство пользователя страница 6

Страница: 6 / 16

DE10-Pro SX
Linux Botting Started
Guide

June 28, 2019

www.terasic.com.tw

Figure 1-4 AS mode setting for MSEL[2:0]

1.5 Install the MicroSD Card

This section will show you how to download the Linux image file for the DE10-Pro SX board and

how to write it into the microSD Card. Finally shows how to install it into the DE10-Pro SX board.



Download Linux image file

The DE10-Pro SX board will be shipped with a microSD card that has been written with Linux

image. If the user wants to copy or re-program the microSD card, you can download the Linux image

file by referring to the link below:

http://url.terasic.com/de10_pro_sx_linux_console



Download the programming tool

To program a microSD card Linux image you can use a free tool called Win32DiskImager.exe from

http://url.terasic.com/win32diskimager

on a Windows machine.



Program the MicroSD Card

The SD card image file needs to be programmed to a microSD card before it can be used.

The steps below present how to create microSD card on a windows machine using

Win32DiskImager.exe.

1. Connect the microSD card to a Windows PC

2. Execute Win32DiskImager.exe

3. Select the image file for microSD card

4. Select the microSD card device

5. Click “write” to start writing the image file to the microSD card. Wait until the image is

successfully written.

Содержание Stratix 10 DE10-Pro SX

















Результаты поиска

Содержание Stratix 10 DE10-Pro SX

Отзывы:

Похожие инструкции для Stratix 10 DE10-Pro SX

Бренды по названию

Популярные бренды

Terasic Stratix 10 DE10-Pro SX, Руководство пользователя

Результаты поиска

Содержание Stratix 10 DE10-Pro SX

Отзывы:

Похожие инструкции для Stratix 10 DE10-Pro SX

Бренды по названию

Популярные бренды