AmiNet110
User Guide V1.0.3
27
7.12 Identity
The Identity page provides details about the internal serial number and the MAC Address.
.!.
Do not use this function if you don’t know exactly what you are doing.
7.13 Infra-Red Configuration
It is possible to program the STB and the Remote Control so that they are ‘paired’, allowing several
STBs with their Remote Controls to co-exist in the same environment. This is particularly useful in
multitrade shows for example, where there may be several STBs receiving IR-signals from several
RCs.
The Remote Control pre-fixes a number (0 to 15) to each STB command. This number is set by
default to 0, but can be programmed on the Remote Control itself to another number, 1 to 15.
The Set Top Box, providing it is running software release 0.9.0 or later, can also be programmed to
respond to codes prefixed with a number in addition to 0. All STBs respond to code 0. Therefore any
STB will always respond to a default Remote Control.
Please ask
for the most current IR-code list.
7.13.1
Setting the Remote Control
On the Remote Control, hold down the STB and OK keys until the STB button lights up permanently.
Then press the three-digit code corresponding to the chosen code. This number must be in the range
000 to 015. The Remote Control will now pre-fix all STB commands with this code.
