TCW242-S_R1.0 – July 2021
Page 51
Teracom does not guarantee the successful operation of the product if the product was used under
conditions deviating from the product specifications.
To ensure that the device works correctly follow the steps below:
Ensure that the device is installed correctly, refer to this document;
Log in to the devices via browser program;
Make proper setup;
Short the “Din1” and “GND”;
Go to “Input/Output page” of WEB interface - proper parameter value should be displayed
in section Digital inputs;
Go to “Modbus sensors page” of WEB interface and Install Modbus RTU (TSH3XX/TST3XX
or third-party) sensor - proper parameters value should be displayed;
At the same time flashing “STS” led should indicate the proper operation;
If the equipment is used in a manner not specified by the manufacturer, the protection provided by
the equipment may be impaired.
In no event will Teracom Ltd. be responsible or liable for indirect or consequential damages resulting
from the use or application of this equipment.
14.
Maintenance
Upon completion of any service or repairs to the device or once per year, a safety check must be
performed to determine that this product is in proper operating condition.
Clean the device only with a dry cloth. Do not use a liquid cleaner or an aerosol cleaner. Do not use a
magnetic/static cleaning device (dust remover) or any kind of abrasive materials to clean the device.
Содержание TCW242-S
Страница 1: ......
Страница 52: ...TCW242 S_R1 0 July 2021 Page 52 Appendix A Fig 1 Fig 2...