Teracom TCW220, Руководство пользователя

Страница: 35 / 51

TCW220_R4.15 – November 2022 Page 35
delanl=xxxx Notification delay for analog inputs
(xxxx is between 0 and 3600)
deldig=xxxx Notification delay for digital inputs
(xxxx is between 0 and 3600)
dda1=xxxx Low to high delay for digital input 1
(xxxx is between 0 and 3600)
ddd1=xxxx
High to low delay for digital input 1
(xxxx is between 0 and 3600)
dda2=xxxx
Low to high delay for digital input 2
(xxxx is between 0 and 3600)
ddd2=xxxx High to low delay for digital input 2
(xxxx is between 0 and 3600)
dataf=x Data format XML/JSON for HHTP Post – 0 XML, 1 JSON
pushtls=x http(s) protocol, where x is 0 for http and 1 for https
purl=yyy URL for HTTP Post to Server 1, where yyy is a full path to php file.
Example:
purl=212.25.45.120:30181/xampp/test/posttest.php
pper=x HTTP Post period in seconds
(x is between 10 and 14400)
dk=xxx HTTP Post key – xxx is up to 17 characters
save Save all previous changes (except relays’ one) in the FLASH
memory.
As every save reflects the FLASH cycles (endurance), this
command should be used very carefully.
pper=120&save – will set Post period to 120 seconds and save it
FIN Terminate session.
(It works with HTTP/HTTPS Post, but not with HTTP Get.)