Teracom TCW112-WD, Руководство пользователя, Страница: 8 / 14

TCW112-WD_R2 - June 2014 Page 8
Relay can be activated manually or automatically in function of ping:
When manual activation is selected, “Pulse” and “ON/OFF” buttons on “Monitoring page” are
active. The duration of pulse for relay activation can be set from 1 to 253 seconds.
Automatic monitoring page refresh interval can be set from 1 to 253 second. If 0 is chosen - no
automatic refresh.
7.5 SNMP Setup page
TCW112-WD supports SNMP v.1. This enables the device to be part of large monitoring and control
networks. The possible settings for “SNMP” section are:
SNMP Configuration – enable/disable SNMP;
SNMP Port – allows standard port changing;
Write/Read community – performs client authentication;
SNMP Traps – enable/disable SNMP trap messages;
IP address – IP address of the receiving host;
Community string – performs client authentication;
Trap Interval - time interval in seconds for SNMP trap messages;
Max. Traps number – maximum number of SNMP trap messages sent, if trap condition is
present.