Teracom TCW112-WD, Руководство пользователя

Страница: 10 / 14

TCW112-WD_R2 - June 2014 Page 10
9. 1-Wire Bus
1-Wire is a registered trademark of Maxim Integrated Products, Inc. It is designed to connect
several sensors over a short wiring. The bus carries power and a single data wire. It is not suitable for
long distances or environments with EMC interference. We strongly recommend to read Maxim’s 1-Wire
tips at
http://www.maxim-ic.com/app-notes/index.mvp/id/148 .
We recommend keeping the total wiring length under 60m, although functionality has been
achieved in longer distance. We cannot guarantee error-free operation over mentioned wiring length.
We guarantee proper operation only with our 1-Wire sensors series TST1XX and TSH2XX.
10. Control and monitoring using SNMP
TCW112-WD can be configured and monitored through SNMP (Simple Network Management
Protocol). This could be done using every SNMPv.1 compatible program. Parameters that can be
changed, are grouped according to their functions in the tables below. To obtain a valid OID number it is
necessary to replace “
x ” symbol with “ 1.3.6.1.4.1.38783” . To save the changes configurationSaved (OID
x.3.7.0) should be set to “1”.
10.1 Product
OID Name Access Description Syntax
x .1.1.0 name read-only Device name String
x .1.2.0 version read-only Firmware version String
x .1.3.0 date read-only Firmware release date String
10.2 Setup -> network
network
OID Name Access Description Syntax
x .2.1.1.0 deviceIPAddress read-write Device IP address IpAddress
x .2.1.2.0 subnetMask read-write Subnet Mask IpAddress
x .2.1.3.0 gateway read-write Gateway IP address IpAddress
x .2.1.4.0 deviceMACAddress read-write Device MAC address OCTET STRING (SIZE(6))
x .2.1.5.0 dhcpConfig read-write DHCP configuration ON/OFF INTEGER { off(0), on(1) }
x .2.1.6.0 dns read-write Domain Name Server Address IpAddress
x .2.1.7.0 hostName read-write Host Name String (SIZE (0..38))
10.3 Setup -> network -> VLAN
network -> VLAN
OID Name Access Description Syntax
x .2.1.10.1.0 vlanStatus read-write VLAN Status ENABLED/DISABLED INTEGER { disabled(0), enabled(1) }
x .2.1.10.2.0 vlanId read-write VLAN ID (0-4095) INTEGER (0..4095)
10.4 Setup -> network -> macFilter
network -> macFilter
OID Name Access Description Syntax
x .2.1.11.1.0 filterMACAddress1 read-only filter1 MAC address (Gateway) OCTET STRING (SIZE(6))
x .2.1.11.2.0 filterMACEnable1 read-write MAC filter 1 Enable ENABLED/DISABLED INTEGER { disabled(0), enabled(1) }
x .2.1.11.3.0 filterMACAddress2 read-write Filter2 MAC address OCTET STRING (SIZE(6))
x .2.1.11.4.0 filterMACEnable2 read-write MAC filter 2 Enable ENABLED/DISABLED INTEGER { disabled(0), enabled(1) }
x .2.1.11.5.0 filterMACAddress3 read-write Filter3 MAC address OCTET STRING (SIZE(6))
x .2.1.11.6.0 filterMACEnable3 read-write MAC filter 3 Enable ENABLED/DISABLED INTEGER { disabled(0), enabled(1) }