TER SRL MIG175GD, Руководство пользователя

Страница: 21 / 37

USER MANUAL
-
19
- YF-74L A2
third time, it would turn back to preset welding voltage and wire feeding speed.
Chart 10
：
fine adjustment display of voltage Chart 11
：
Fine adjustment display of Inductance
presetting range under MIG mode range under MIG mode
7 3 seconds later after setting the welding parameters, the
【
multifunctional data display
】
would flashes for one
time, which means the data has been saved. Moreover, the panel would display these data when restart the
machine next time if the parameters keep unchanged.
8 The panel displays as Chart 12 when perform welding, which means the welding voltage is 17.4V, and the
current is 80A.
9
Releasing the torch switch and stopping welding, the panel displays as Chart 7. Moreover,“HOLD” flashes for 3
seconds and quenched, which means the welding stops. 2 seconds later,
【
multifunctional data display
】
redisplays the preset current.
Chart 12
：
display status when perform welding under Chart 13
：
Display status after stop welding under
MIG mode MIG mode
Malfunction display
：
1
）
Malfunction display of wire feeder
The panel displays as Chart 14 when the wire feeder is malfunctioning, and the
【
multifunctional data display
】
flashes
continuously, the machine can not work normally. Please restart the machine, the panel would display the parameters
that were set before malfunction occurrence.
2
）
Malfunction display of over-current
The panel displays as Chart 15 when over-current, and the
【
multifunctional data display
】
flashes continuously, the
machine can not work normally. Restart the machine, the panel would display the parameters that were set before
malfunction occurrence.