TER SRL MIG175GD, Руководство пользователя

Страница: 18 / 37

USER MANUAL
-
16
- YF-74L A2
Operation Instruction
：
1
）
The starting up display
Switch on the welding power source, the front panel displays as Chart 1. After the
【
Multifunctional data display
】
(or
any key or knob on front panel) flashes for 5 seconds, the machine enters into the welding mode that saved in the
last shutdown.
Chart 1: the starting-up display interface
2
）
Operation instruction under STICK mode.
1 When welding stops, Press the
【
STICK/LIFT TIG/MIG switch key
】，
the STICK indicator lights up
，
and it
turns into STICK mode.
2 When under STICK mode, pressing the
【
VRD/2T/4T switch key
】
, VRD function is enabled when the
indicator lights up, and displays in
【
multifunctional data display
】
. Or, the VRD function isn’t enabled if the
indicator is off. (Chart 2, Chart 3)
Chart 2: under STICK mode, preset current display with VRD enabled Chart 3: under STICK mode preset current
display VRD disabled
3
【
multifunctional data display
】
shows the preset current“080
A
”, its unit is ampere(A).
4 Adjusting the
【
Multifunctional data adjusting knob
】
can change the welding current during welding process,
and displayed in
【
multifunctional data display
】
. The welding current range is 10A-175A.
5 3 seconds later after setting the welding parameters, the
【
multifunctional data display
】
would flashes for one
time, which means the data has been saved. Moreover, the panel would display these data when restart the
machine next time if the parameters keep unchanged.
6 The panel displays as Chart 4 when perform welding, which means the welding voltage is 23.2V, and the
preset current 80A. 5 seconds later, it returns to the preset current state.