TEQSAS LAP-TEQ PLUS, Руководство по эксплуатации

Страница: 17 / 36

First operation
LAP-TEQ PLUS 17
► Connect the display unit (1) and a sensor unit (3) using a standard 3-pin
XLR cable (2).
There is no limit to the number of sensor units that can be connected
successively to a display unit. For example, three sensor units can be used to
check the correct orientation of a left and right PA system, as well as a centre
cluster. Alternatively, one sensor unit can be attached permanently to each
bumper.
To function correctly, the display unit must be connected to a sensor unit using
a standard XLR connection cable. The sensor units are supplied with power by
means of the XLR cable. There are no rechargeable batteries or other
batteries in the sensor unit.
If the cable between the display and the sensor unit is longer than 75 m, this
will reduce the brightness of the laser. However, the measuring function will
not be affected.
For a distance greater than 75 m, you must use an XLR cable with a larger
cross section than 0.22 mm². This will reduce the voltage drop along the cable
route.