
6
t
Assembling the BBQ
1. First read through the assembly instructions completely.
2. Allow yourself enough time for assembly and find an even
working space of two to three square meters.
3. Place the necessary tools within reach. Small parts such as
handles will probably be preassembled.
4. Two people are needed for the assembly.
– Do not set up the BBQ near entryways or high-traffic zones.
– Always exercise extreme caution while grilling. If distracted,
you can lose control of the device.
– Always be attentive to and aware of what you are doing. Do
not use this product if you are unfocussed or tired, or if you are
under the influence of drugs, alcohol, or medications. Just one
moment of carelessness during use of the product can lead to
serious injuries.
Attention Risk of damage!
During use, the screws can loosen slowly and impair
the BBQ's stability.
– Check the stability of the screws prior to each use. If necessary,
tighten all of the screws again to ensure the BBQ gazebo is
standing securely.
Attention Risk of damage!
Do not use any strong or grinding solvents or abrasive
pads, since these can attack the surfaces and leave
behind scrape marks.
Danger Risk of burning and accidents!
Caution!
If you detect the smell of gas:
– Immediately close the gas intake of the gas bottle.
– Extinguish all open flames.
– Do not operate any electrical devices.
– Ventilate the surrounding area.
– Carry out a leakage point test, as described in this operating
manual.
– If, after testing and once the leakages have been remedied,
you continue to detect the smell of gas, do not continue to
use the BBQ. Immediately inform a gas technician or the
distributor from which you purchased the equipment.
Danger Risk of burning and accidents!
Do not store the gas BBQ in immediate proximity
to combustibles (e.g. petrol) or other flammable
liquids or gases.
– The gas bottle must be separated from the gas BBQ during
storage.
– Do not store the gas bottle in immediate proximity to the gas
BBQ.
– Do not place the gas bottle immediately under the gas BBQ.
Assembly
Preparation
Danger Risk of injury!
Failure to follow these instructions can lead to
problems and risks while using the BBQ.
– Follow all of the assembly instructions listed here.
required tools
1 x Phillips screwdriver
1 x adjustable spanner
Step 1
20
21
Screw the hose with the regulator (21) to the burner housing (1)
Attach the temperature regulator (20) to the control panel of the
burner housing (1).
Step 2
A
14
13
B
12
10
11
Fasten the long support leg (RB) (11) with screws (A) to the right
back side of the burner housing (1).
Fasten the short support leg (LB) (14) with screws (A) to the left
back side of the burner housing (1).
Fasten the short support leg (LF) (13), the cross rod (12) and the
long support leg (RF) (10) with screws (A) and screws (B) to the
front side of the burner housing (1).
P160144_TEPRO_3160UK_Bloomfield_2Brenner_20161007_EN(UK).indd 6
7/10/16 9:39 AM