Teo 4101, Руководство по администрированию сети

Страница: 46 / 86

Teo IP Telephone Network Administration Guide
Page 46 13-280132 Rev. Q
General Phone Settings
XML Tag Data / Description
<
phone_dial_timeout
>
seconds
</ phone_dial_timeout >
When off-hook, this is the amount of time the phone
waits after a digit is pressed before sending the dialed
digits to the SIP Call Server for call processing, if the
user does not otherwise initiate sending by pressing
the SEND key.
A value of
0
(zero) allows an unlimited time for
dialing, with no timeout.
0 – 30 seconds, default value = 10
< sip_invite_timeout >
seconds
</ sip_invite_timeout >
This is the time period that the phone will wait for a
response to an INVITE when originating a call. The
call will be abandoned if the called party is not
detected before the timeout expires.
A value of
0 (zero) allows an unlimited time for the
server to respond, with no timeout.
0
–
120
seconds, default value = 40
< refer_timeout >
seconds
</ refer_timeout
Timeout for call transfers. If the transfer is not
completed by this time, the phone clears the calls.
0 –
99 , default value = 4
< phone_max_ringing >
seconds
</ phone_max_ringing >
Specifies the maximum number of seconds that the
phone will persist in the ringing state for an incoming
call.
A value of
0 (zero) allows unlimited ringing, with no
timeout.
0
–
300
seconds, default value = 0
< phone_max_reorder >
seconds
</ phone_max_reorder >
Specifies the maximum number of seconds that the
phone will persist in the reorder (disconnected or
error) state.
A value of
0 (zero) allows the phone to stay in the
reorder state forever, with no timeout.
0 – 300 seconds, default value = 180
< ring_offhk_continuous >
ON/OFF
</ ring_offhk_continuous >
Determines whether the phone rings normally, or
only provides a single burst of ringing when the user
is on a call.
ON
– continuous ring when off-hook
OFF – single ring when off-hook (default)