Tenways CGO800S, Руководство по установке

Страница: 5 / 19

(1)
(2)
(3)
Adjust the quick release lever to the open position. Install the front
wheel; make sure that the brake disc is in the middle of the brake
clamps.
Tighten the quick release nut, and then turn it to the closed position
as shown in the figure.
Push the e-bike back and forth and press the brake to check if the
front wheel wobbles. If so, please repeat step 2 until you feel enough
resistance when closing the quick release lever.
(4)
(5)
Turn the front wheel by hand and check if there are any signs
of scraping.
If yes, please follow the steps below to make adjustments:
Install the front wheel.
06
-
-
-
-
-
-
Use the 5mm Hex Key to slightly loosen the mounting screws of the
brake clamps to make sure that they can move slightly.
Press the front brake 3 to 5 times.
Hold the front brake and tighten the mounting screws of the brake
clamps.
Turn the front wheel by hand and listen for the sound of friction.
If there is friction, loosen the mounting screws of the brake clamps.
Manually adjust the position of the brake clamps to center the disc,
and then re-tighten the screws.
This step is extremely important, so please read carefully. This step is extremely important, so please read carefully.
3mm
Hex Key
4mm
Hex Key
5mm
Hex Key
8 9