TentCraft MASTERTENT, Инструкции по установке

Страница: 3 / 4

Step 1
3
Remove the tent bag from the shipping box. Next, remove the tent from the
bag by opening the velcro on the side of the bag and lifting it up and off of the
tent frame.
Step 2
Place two people on opposite sides of the tent to ensure the easiest setup.
**If the setup includes a peak flag or banner, install the pole with peak
flag/banner attached into the peak caps at this point**
Step 3
Each person will grab the center scissor piece on their side of the tent frame
and pull it away from the center by walking/pulling backwards. Move the
legs outwards until the scissor pieces are fully extended.
Step 4
To lock the roof into place, stand near one of the legs, with a foot holding
down the baseplate at the end of the leg. Grab and press up on the scissor
piece at the corner bracket until it slides up the leg and locks into place.
Repeat this step for the remaining three legs.
10x20, 13x20, 13x26