TentCraft HEXAGON PAVILION, Инструкции по установке

Страница: 7 / 8

Step 17
7
Climb the ladder and unfold the roof so that it covers the majority of the
shoulder pieces. Locate the grommet in the middle of the roof and place it on
the top of the peak pole. Insert the peak cap through the grommet and into
the grey peak liner to hold the roof in place.
Step 18
Next, it may be necessary to rotate the canopy so that the seams in the roof
line up with the shoulder pieces and legs. At the outside end of each shoulder
piece, pull the pocket on the inside of the roof over the small metal tab on the
shoulder piece. This attaches the roof to all six shoulder pieces.
Step 19
Extend the arms of each shoulder piece to pull the canopy out to its full size.
Once the arm has been extended all the way, insert the remaining pin into the
hole in the arm to secure it into place. Repeat this step for the remaining five
arms/shoulder pieces. **It may be necessary to use a step ladder to reach the
extension arms.**
Step 20
Enter the pavilion by lifting the counter up and opening the door. Once inside
the tent, push the peak pole up from the middle of the tent, fully extending
the roof.
HEXAGON PAVILION