background image

 

 

 

 

 

 

 

 

 

         9 

1.1

 

Intended use 

 

The tenso-comfort BPM 105 / BPM 205 is a  
non-invasive wrist blood pressure device 
intended for use in measuring blood pressure 
and pulse rate by adults 
 
The measuring method is an oscillometric blood 
pressure measurement with automatic sequence 
and refers to the auscultatory method as the 
reference standard. 
 
The model version BPM 105 is equipped with a 
radio module to transmit the measurement data 
to a PC or PDA. 
 
 
 
 
 
 
 
 
 
 
 

1.2

 

Warnings  

 
The symbols below identify and alert the 
user to the presence of important safety, 
operating, and service instructions. 
 
WARNING: 
Indicates that non-compliance with the 
safety instructions may lead to health 
injury or bodily harm of the user or other 
persons. 
 
CAUTION: 
Indicates that non-compliance with the 
safety instructions may lead to damage to 
the product or other property and/or to 
bodily harm of the user or other persons. 
 

General Warnings:  

 

WARNING:

Please read these safety and operations 
instructions in their entirety for this 
device and any of its accompanying 
accessories and software and all other 
literature provided in the box prior to 
using or allowing another person to use 

this device or any of its accompanying 
accessories or software.   
When using this Biocomfort device, 
compliance with these basic safety 
instructions is essential to reducing the 
risk of personal injury or damage to 
property.  Retain all of these instructions
for future reference. 

 

WARNING:

  

This device is only intended for use as 
described in this manual. Do not use 
this device for any other purpose.  This 
device is intended only for measuring 
blood pressure and pulse rate. 

 

WARNING:

  

Contact you physician for specific 
information about your blood pressure.  
Contact your doctor immediately about 
any unusually results measured by the 
device, such as, for example, high or 
low blood pressure or irregular pulse 
rate. Self-diagnosis and treatment using 
measured results may be dangerous.  

This device is not intended to provide 
any diagnosis or treatment. Always 
follow the instructions of your physician 
or licensed healthcare provider.     

 

WARNING:

The values measured on this Biocomfort 
device should only be interpreted by a 
physician. 

 

WARNING:

Do not take any new medication, cease 
taking any medication that you are 
currently taking, or modify or varify the 
dosage of medication you are currently 
taking without consulting your 
physician.   

 

WARNING:

This device will not 

properly measure blood pressure in 
individuals with severe 
arteriosclerosis, severe hypertension, 
severe diabetes, severe kidney disease 
or cascular disease or other conditions 
that may compromise circulation.  
Consult your physician before using 

Содержание BPM105


































Отзывы: