Error
messages
Causes
Measures
Remarks
10 error
Internal read error
Switch off the device and
restart.
If this error message appears re-
peatedly, have the device checked
by the manufacturer.
11 error
Internal write error
Switch off the device and
restart.
If this error message appears re-
peatedly, have the device checked
by the manufacturer.
12 error
Function test of the system
was not completed success-
fully.
Switch off the device and
restart.
If this error message appears re-
peatedly, have the device checked
by the manufacturer.
15 error
Internal memory error
Switch off the device and
restart.
If this error message appears re-
peatedly, have the device checked
by the manufacturer.
19 error
(BPM105)
No user has yet been created
with the Health Manager
software.
Configure the device with
the Health Manager soft-
ware and enable at least
one user.
The first time the device is put into
operation, at least one user must
be registered.
Error
messages
Causes
Measures
Remarks
21 error
(BPM105)
No wireless module found
Switch off the device and
restart.
If this error message appears re-
peatedly, have the device checked
by the manufacturer.
23 error
(BPM105)
The wireless connection
could not be cut.
Switch off the device and
restart.
Measurement cannot be carried
out.
24 error
(BPM105)
Communication error
This only occurs with the software,
which is available as an accessory.
error and
blinking
battery
symbol
Batteries are too weak.
Switch off the device and
exchange the batteries.
When the battery symbol is blink-
ing, measurement is no longer
possible.
Note:
E
rr
or
m
es
sa
ges
/c
au
ses
o
f e
rr
or
a
nd
m
eas
ur
es
to
ta
ke
7
If you can’t solve an occurring problem, contact Biocomfort
Inc.
.
38
39
