Tensai F290A, Инструкция по эксплуатации

Страница: 4 / 16

4
Installation
To ensure that the appliance operates properly and to
reduce energy consumption, it is important that the
appliance is installed correctly
.
Ventilation
The compressor and condenser generate heat and, therefore,
need to be ventilated properly. Rooms with no ventilation are
not suited for installation of the appliance. Therefore, it should
be installed in a room with an opening (window or French
window) that provide the appropriate amount of air re-
circulation. It is also important to install it in a free humidity
room.
During installation, make sure not to cover or obstruct the
grates that allow for proper ventilation of the appliance. For
proper ventilation of the appliance, leave a space of at least 10
cm between the sides of the appliance and any adjacent
cabinets/walls.
Away from Heat
Avoid positioning the appliance in a place where it is directly
exposed to sunlight or near an oven, cook top or the like.
Electrical and Earth Connection
The appliance should not be turned on right after transportation.
Two hours is the advised time so that the oil from the motor-
compressor gets back to its original position.
Before proceeding with the electrical connection, make sure
that the voltage indicated on the rating plate, located inside the
appliance, corresponds to the mains voltage in your home and
that the socket is fitted with a standard earth wire in accordance
with safety standards. If the socket is not fitted with an earth
wire, the manufacturer will not be held liability for any damages
and or injuries arising out of the use of the appliance. Do not
use multiple sockets or adapters.
Position the appliance in such a way that you can access the
socket where it is plugged in.
Insufficient power
The electrical socket must be able to handle the maximum
power load of the appliance, which is indicated on the rating
plate located inside the appliance.
The Appliance
A Freezer Compartment
B Temperature Adjustment Knob
Turning the knob will adjust the temperature inside the
appliance.
C Internal Light
It will light when the door is opened.
D Removable Shelves
E Fruit and Vegetable Bin
F Multipurpose shelf
G Bottle shelves
H Regulation feet
I Defrost water discharge hole
Setting Up The Appliance
Before starting the appliance, follow the installation instructions
(see “Installation”).
Before connecting the appliance, clean the compartments and
accessories with lukewarm water and bicarbonate.
Insert the plug into the socket and ensure that the internal light
illuminates.
Turn the temperature adjustment knob “B” to an average value.
After a few hours you will be able to put food in the refrigerator.
NOTICE
Use average temperature settings to ensure optimum
performance and to save energy.
Efficient Usage of The Appliance
Using the refrigerator to its full potential
The temperature inside the refrigerator compartment
automatically adjusts itself according to the position of the
thermostat knob
“
B
”:
1 = warmest, 5 = coldest
Use average temperature settings to ensure optimum
performance and to save energy.
Place only cold or lukewarm foods in the compartment, not hot
foods.
Remember that cooked foods do not last longer than raw foods.
Do not store liquids in open containers. They will increase
humidity in the refrigerator and cause condensation to form.
Using the freezer to its full potential
Remember that you should never refreeze products you have
allowed to thaw, even if only partially. Once thawed, cook the
food, then either eat (within 24 hours) or refreeze it.
For the best storage and thawing, remember to freeze small
portions. This will ensure rapid and uniform freezing.
Mark package with a description of the contents and the date it
was frozen.
Never freeze more food than that allowed by the maximum
freezing capacity indicated on the data plate which is located on
the back of the appliance.
Place the food to be frozen into the freezer, making sure that it
is placed, to the furthest extent possible, in direct contact with
the side walls of the deepest part of the freezer and not in
contact with food that has already been frozen.
Avoid opening the freezer door during the freezing process.
In the case of power failure or breakdown, do not open the
freezer door. This will help maintain the temperature inside the
freezer, ensuring that the goods are conserved for at least 20
hours.
Do not place full bottles in the freezer because liquids increase
in volume when they freeze and this could cause the bottles to
burst.
Follow the instructions on the packages of frozen foods
scrupulously. If none are provided, do not store the food for
more than 3 months from the date of purchase.
When purchasing frozen food, make sure that they have been
stored at the proper temperature and that the package is
properly sealed. If the package is damp on the outside or is
abnormally swollen, it is likely that the package was stored at an
inadequate temperature and the food has deteriorated. It is best
to transport them in appropriate containers to keep them cold
and then place them in the freezer immediately.