REPLACEMENT PARTS
Ref. No. 8
Ref. No. 7
Ref. No. 4
Ref. No. 6
Ref. No. 5
*Included in Ref. No. 5, locking handle with keys and hardware (Part No. 043LH). May be ordered alone or as part of the full hardware set.
2.
To move the shelf, using your
hands apply pressure to the
underside of the shelf and
tap it off the tabs.
3.
Place the shelf at the desired
level. Insert the shelf edges
into the tabs at the new
location. Be sure that the
shelf is securely fitted into the
tabs at all points of contact.
4.
The cabinet must be level
in order for the doors to
close properly. Levelers may
be adjusted by placing the
nut driver through the hole
in each end of the sill and
adjusting the leveling screw.
Insert hex head driver
through hole (above) to
adjust leveler (below).
Ref. No. 1
Ref.
No. 2
Ref.
No. 3
Ref.
No. 9
NOTE: Additional hardware may be included for replacement purposes.
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.
However, should your unit contain missing or damaged parts, please contact your purchase location.
REF. NO.
DESCRIPTION
1
Shelf
4
306
2
Left Door
1
056LD
3
Right
Door
1 056RD
4
Locking Bar Set
1
043LB
5
Locking Handle w/keys & hardware
1
043LH
6
Locking Cam*
1
944LC
7
Locking Bar Guide Insert (Nylon)*
2
944GI
8
Cotter Pin*
1
CTRPN
9
Dummy
Handle*
1 043DH
10
Hinge Pins*
8
944HP
QTY. PART NO.
49B251
1.
Shelves are shipped with
an inverted lance to hold
them in place during
shipping. To move the
shelves for the first time,
firmly push the lance
towards the back of the
cabinet (from the inside)
until they flatten. Then
follow the steps below.
