3.
In order to lock in the flanges, allow the front part
of the unit to slip underneath the flanges on the
base. Make sure that the unit is lined up with the
base, with no excess sides hanging over the base.
4.
Bolt two tech screws through the bottom shelf
of the locker.
1.
Lay the locker on it’s side. Use a tarp or cloth as a surface to
ensure that the unit is not scratched.
2.
Attach the base by sliding the base over the top of the flanges
on the bottom part of the unit to lock it into place.
3.
Bolt two tech screws
through the bottom shelf
of the locker.
4.
With help from an associate,
lift the locker to the initial
upright position. Finish by
securing the locker to the
wall or to the next locker.
When Anchoring a 3-Wide Unit
to the Wall or Another Locker:
49B267