ATTACHMENT OF 1-WIDE WELDED LOCKER BASE
1.
Securely mount the locker base to the floor. (Please use your
local codes when mounting your unit. Codes may vary due
to location.)
Two people required for assembly. Approximate assembly time: 5-10 minutes.
2.
With help from an associate, lift the unit at an angle and
lock the front part of the unit in to the flanges of the base.
3.
In order to lock in the flanges, allow the front part of
the unit to slip underneath the flanges on the base.
Make sure that the unit is lined up with the base, with
no excess sides hanging over the base.
4.
Bolt two tech screws through the bottom shelf of
the locker.
When Anchoring a 1-Wide Unit to the Floor:
When Anchoring a 1-Wide Unit
to the Wall or Another Locker: